TMM 40124

AC/DC Power Supply TMM 40 Series, 40 Watt • Fully encapsulated low profile plastic casing in PCB version • 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition • IT and industrial safety according to IEC/EN/UL 62368-1 • Ready to meet ErP directive 95%, 0.5 periods, perf. criteria A >95%, 1 period, perf. criteria A >95%, 250 periods, perf. criteria B General Specifications Relative Humidity Temperature Ranges 95% max. (non condensing) –40°C to +80°C –40°C to +95°C - Operating Temperature - Storage Temperature All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 5 TMM 40 Series, 40 Watt Power Derating - High Temperature Over Temperature Protection Switch Off - Protection Mode - Measurement Point Cooling System Altitude During Operation Switching Frequency Insulation System Working Voltage (rated) Isolation Test Voltage Isolation Resistance Leakage Current Reliability Washing Process Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Soldering Profile - Input to Output, 60 s - Input to Output, 500 VDC - Touch Current - Calculated MTBF Weight Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number 3.75 %/K above 60°C See application note: www.tracopower.com/overview/tmm40 142°C typ. (Automatic recovery at 67°C typ.) Internal IC temperature Natural convection (20 LFM) 5'000 m max. 130 kHz typ. (PWM) Reinforced Insulation 240 VAC 4'000 VAC 1'000 MΩ min. 100 µA max. 200'000 h (MIL-HDBK-217F, ground benign) Not allowed Plastic resin (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2 - 4 µm) Tin (3 - 5 µm), matte Plastic Case PCB Mount THD (Through-Hole Device) Lead-Free Wave Soldering 260°C / 10 s max. 310 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) fadb5307-b3f5-476e-a12d-7e37a33a0fc8 Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tmm40 All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 4 / 5 TMM 40 Series, 40 Watt Outline Dimensions 63.5 (2.50) 27.94 27.94 (1.10) 5.0 (0.20) 3 2 x M4 THD 31.6 (1.24) Dual Output 1 AC (N) AC (N) 2 AC (L) AC (L) 3 +Vout +Vout 5 –Vout Common 7 NC –Vout NC: Not connected 5.0 Bottom view 3.8 27.94 (1.10) 27.94 (1.10) 31.75 (1.25) (0.15) 1 2 0.7 (0.03) (0.20) 53.3 (2.1) (0.63) Pin Single Output 81.3 (3.20) 88.9 (3.50) 5 7 15.9 Pinout 30.0 (1.18) (1.10) 6.0 (0.24) Dimensions in mm (inch) Tolerances ±0.5 (±0.02) Pin Ø 1.0 ±0.1 (0.04 ±0.004) Pin pich tolerances ±0.25 (±0.01) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 5 / 5